Industrial high-temperature mesh belt drying line hardware accessories multi-layer tunnel drying furnace
This product is mainly used for water vapor, solidification, and drying of hardware accessories to improve performance. It is also widely used in the food industry. It is divided into belt baking line and mesh baking line. Relatively speaking, the temperature that the mesh belt can adapt to is around (200 degrees), while the temperature that the belt baking line can adapt to is between (room temperature -200 degrees). It is also used for drying materials with certain humidity or particle size, such as iron ore, titanium ore, quartz sand, and other minerals.
1. The baked product is heated both inside and outside, with a small temperature difference between inside and outside, without deformation, discoloration, and stable quality. 2. Fast baking speed and high efficiency, which can shorten the baking time by 1/6-1/4 and significantly shorten the production cycle.
3. Achieve the same production capacity with low total power and the most conservative energy-saving rate of over 30%.
4. Due to the large energy transmission capacity per unit area, it has a small volume and saves construction costs.
5. It can be connected to the production line to effectively control WIP, reduce handling, reduce defects, and save manpower.
6. Temperature can be segmented and controlled to meet product requirements. A reasonable temperature curve ensures stable product quality.
7. Forced exhaust device, with minimal solvent residue, low risk, explosion-proof, and environmentally friendly.
8. The outer temperature of the casing is close to the environmentally friendly temperature, providing a comfortable working environment and reducing energy waste.
9. The product does not need to be left standing after baking, reducing working hours and pollution.
10. Adopting an infinite constant temperature control system, the temperature is uniform, ensuring product quality.
Widely used, widely used for cleaning and passivation of die-casting aluminum parts; Stamping parts degreasing and polishing parts waxing stainless steel products degreasing iron galvanized products degreasing, home appliance manufacturing, automotive parts, food processing, aerospace, electronic optics, etc.
| Brand | Jiaheda |
| Working pressure | 18 |
| Purpose | Industrial |
| Weight | 1000 |
| Flow rate | 65 |
| Inlet temperature | hot water |
| High pressure pipe length | 70 |
| Moving method | fixed base |
| Motor speed | 120 |
| Voltage | 200 |
| Motor power | 121 |
| Injection pressure | 150 |
| Water absorption height | 2000 |
| Type | Mobile |
| Origin | Shunde District, Foshan City |
| Size | Customized |
| Note | Specification parameters can be customized as needed |
